Latest
User Tip: How to Print Lameness Locator® Reports
By
Equinosis Staff |
Updated on
|
Bluetooth,
Equinosis Staff,
FAQ,
Software Navigation
Your tablet and printer may first need to be configured for it to show in the dropdown menu of available printers. Consult your printer user manual instructions on configuring your printer for your tablet PC. Option 1: Printing directly from Lameness Locator® computer using a wi-fi or Bluetooth® printer or connected directly to a printer via cable. Note: if using a Bluetooth® printer, you must use the Bluetooth® receiver provided with the system as internal Bluetooth® is disabled from the tablet computers. When viewing the Lameness Locator® report within the program, you will see a small printer icon...
FAQ: Why can't I buy any tablet and put Lameness Locator on it?
By Updated on | Bluetooth, Equipment, FAQ
The Lameness Locator program has specific computing requirements to work well. In addition, because the Bluetooth radio is an integral component in data acquisition, certain “imaging” requirements specific to the device are required. And, because technology is always changing and advancing – whether hardware like the Bluetooth transceiver, or 3rd party software like MATLAB – it takes significant programming and maintenance simply to keep up. At this time, Equinosis can only support a limited number of platforms. However, Equinosis is moving in the direction of one day being able to run LL algorithms in the cloud, so any device with...
All
User Tip: How to Print Lameness Locator® Reports
FAQ: Why can't I buy any tablet and put Lameness Locator on it?